rev date: 02/12/2010 5 www.seielect.com this specification may be changed at any time without prior notice marketing@seielect.com please confirm technical specificatio ns before you order and/or use. rmcp series general purpose high power th ick film chip resistors stackpole electronics, inc. resistive product solutions features: ? high power rating ? nickel barrier terminations standard ? power derating from 100% at 70oc to zero at +155oc ? rohs compliant 1% 5% 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 200 ppm/oc 1 - 9.76 1 - 9.76 100 ppm/oc 10 - 1m 10 - 1m 200 ppm/oc 1.02m - 10m 1.02m - 10m 1 lesser of pr or maximum workin g volta g e. 400v 3 amp rmcp 2512 2512 2.000w 200v 400v 3 amp rmcp 1210 1210 0.500w rmcp 2010 2010 1.000w 200v 200v rmcp 1206 1206 0.333w 200v rmcp 0805 0805 0.250w 150v 50v 400v 3 amp 100v 300v 50v 1 amp 2 amp 400v 2 amp 0603 0.125w rmcp 0402 rmcp 0603 0402 0.100w maximum current 100v resistance temperature coefficient ohmic range ( ? ) and tolerance maximum overload voltage 1 amp type / code package type power rating (watts) @ 70oc maximum working voltage 1 electrical specifications nominal resistance 4.7k type description code wattage size tolerance v alues sei types pkg qty description code rmcp high power 0402 0.100w 0402 1% e96,e24 0402 10,000 7" reel - paper r 0603 0.125w 0603 5% e24 10,000 10" reel - paper g 0805 0.250w 0805 5,000 7" reel - paper r 1206 0.330w 1206 2010, 2512 4,000 7" reel - paper r 1210 0.500w 1210 2010 1.000w 2010 2512 2.000w 2512 5% r 0603, 0805, 1206, 1210 sei type code tolerance packaging rmcp 0603 how to order
rev date: 02/12/2010 6 www.seielect.com this specification may be changed at any time without prior notice marketing@seielect.com please confirm technical specificatio ns before you order and/or use. rmcp series general purpose high power th ick film chip resistors stackpole electronics, inc. resistive product solutions lwh a b body length body width body height top termination bottom termination 0.039 0.002 0.020 0.002 0.014 0.002 0.008 0.004 0.010 +0.002/-0.004 inches 1.00 0.05 0.50 0.05 0.35 0.05 0.20 0.10 0.25 + 0.05/-0.10 mm 0.063 0.004 0.031 0.004 0.018 0.004 0.012 0.008 0.012 0.008 inches 1.60 0.10 0.80 0.10 0.45 0.10 0.30 0.20 0.30 0.20 mm 0.079 0.008 0.049 0.004 0.020 0.006 0.016 0.008 0.016 0.008 inches 2.00 0.20 1.25 0.10 0.50 0.15 0.40 0.20 0.40 0.20 mm 0.126 0.008 0.063 0.006 0.021 0.006 0.020 0.010 0.020 0.010 inches 3.20 0.20 1.60 0.15 0.55 0.15 0.50 0.25 0.50 0.25 mm 0.126 0.008 0.098 0.008 0.021 0.006 0.020 0.010 0.020 0.010 inches 3.20 0.20 2.50 0.20 0.55 0.15 0.50 0.25 0.50 0.25 mm 0.197 0.008 0.098 0.008 0.021 0.006 0.024 0.010 0.024 0.010 inches 5.00 0.20 2.5 0.20 0.55 0.15 0.60 0.25 0.60 0.25 mm 0.248 0.008 0.126 0.008 0.021 0.006 0.024 0.010 0.024 0.010 inches 6.30 0.20 3.20 0.20 0.55 0.15 0.60 0.25 0.60 0.25 mm rmcp 2512 rmcp 0805 rmcp 1206 rmcp 1210 rmcp 2010 units rmcp 0402 rmcp 0603 type / code mechanical specifications operating temperature range: -65oc to +125oc (0402 size) -65oc to +155oc (all others) dielectric withstanding voltage resistance to soldering heat (1% + 0.05 ? ) (2% + 0.1 ? ) (1% + 0.05 ? ) test results test test conditions (jis c 5202) short time overload 90 min. on, 30 min. off for 1,000 hrs. -0hrs./+48hrs. 1/10 rated voltage for 3 sec. max. then rated voltage for 3 sec. max. 2.5x rated voltage for 5 seconds 100 vac, 1 minute 260oc 5oc, for 10 sec. 0.5 sec. (solder bath) 235oc 5oc, for 2 sec. 0.5 sec. (colophonium flux) -65oc: 30 min. 25oc: 2 to 3 min. 155oc: 30 min. 25oc: 2 to 3 min. 40oc 2oc, 90% rh, rated load temperature cycle endurance (damp load) jumper (<0.05 ? ) solderability 95% coverage, minimum (1% + 0.05 ? ) (3% + 0.1 ? ) jumper (<0.05 ? ) (5 cycles) robustness of termination endurance (rated load) 70oc 2oc, rated load (3% + 0.1 ? ) 90 min. on, 30 min. off for 1,000 hrs. -0hrs./+48hrs. jumper (<0.05 ? ) voltage coefficient 100 (ppm/v) (1% + 0.05 ohm) bend of 3mm for 5 1 sec. performance characteristics
|
